Replacement Parts: Pools or Spas | Safety

Pool Ground Cloth

Availability: Out of stock

More Views

Description

Help protect your above ground pool bottom over the years with the Intex Pool Ground Cloth!

  • 15½ ft x 15½ ft (472cm x 472cm) square
  • Constructed of durable material
  • For use with all 8 ft to 15 ft (244-457cm) Easy Set® Pools and Frame Pools
  • easily stores and transports

Specs

Specs

Product Size 186"X186"
Age Grading adult
Item # 58932
Package Dimension 14 in x 14.875 in x 2.625 in
Package Weight 4.15 lbs
Package Size 186"X186"

IN THE BOX:

  • Ground Cloth
Product Size 186"X186"
Age Grading adult
Item # 58932
Package Dimension 14 in x 14.875 in x 2.625 in
Package Weight 4.15 lbs
Package Size 186"X186"

IN THE BOX:

  • Ground Cloth

Safety Information

Intex Recreation Corp. is dedicated to the safe use of all of its products. While all accidents cannot be prevented, practicing good safety habits, setting and following rules, carefully reading instruction manuals, and vigilant supervision can greatly reduce the likelihood of injury as well as reduce injury severity. Please take the time to review the following information, and make use of the link provided, to assist in keeping you and your family safe from injury.

Learn More >

Documentation & Support

Looking for more assembly information or product support? Find everything you need in our product support section.

Replacement Parts

Looking for replacment parts for this product? Find Them Here>

Popular FAQs

See All >
      Can grass grow through the ground cloth and / or pool liner?
      Yes, in some cases certain types of hardy grass such as Bermuda or St. Augustine can grow through the liner. Before setting up your pool, it is recommended that you clear the area of these types of hardy grasses. INTEX will not be held responsible for grasses that may grow through the ground cloth and / or pool liner, as this is not a manufacturing defect. A ground cloth or tarp may be helpful in preventing this from occurring.
      My pool has a milky color, do I need to change the water or is it treatable?
      Water condition varies from country to country, states, region, and within specific zones and areas. In some regions the water could be "hard water", this is because the water contains excessive minerals, such as calcium and magnesium, thus causing the water to adopt a milky color. Check your local pool supply store for advice on water treatment and balance.
      Winterizing your Above Ground Pool
      Your pool can be easily emptied and stored in a safe place during the winter. However, many people choose to leave their pool up year round. In areas where freezing temperatures occur, there is risk of ice damage. It is recommended to drain, disassemble and store the pool in a safe place when temperatures drop below 32 degrees Fahrenheit. See "How To Drain Your Pool" section. Clean pool water thoroughly (If Easy Set Pool make sure the top ring is properly inflated). Remove the skimmer (if applicable) or any accessories attached to the threaded strainer connector. Replace strainer grid if necessary. Be sure all accessories parts are clean and completely dry before storage. Plug the Inlet and Outlet fitting from the inside of the pool with the plug provided (sizes 10' and 12'). Close the Inlet and Outlet Plunger Valve (15', 18', and 24'). Remove the ladder (if applicable) and store in a safe place. Be sure the ladder is completely dry before storage. Remove the hoses that connect the pump and filter to the pool. Add appropriate winter chemicals. Consult your local pool dealer as different regions vary greatly. Cover pool with Intex Pool Cover. IMPORTANT: INTEX POOL COVER IS NOT A SAFETY COVER. Clean and drain pump, filter housing and hoses. Remove and discard old filter cartridge (keep a spare cartridge available for next season). Bring pump and filter parts indoors and store in a safe and dry area, preferably heated. STORING POOL FOR WINTER After draining pool, dry pool liner completely (100%). Sprinkle talcum powder on liner to prevent vinyl from sticking together and to absorb any water you may have missed. Roll pool liner to avoid creases and relocate to storage area. Place it in original carton if you saved it. Keep all small parts together with filter pump, manual, and pool, and then place in an area that will remain at room temperature throughout the storage season.
View all FAQ's for this product

Customer Reviews

Write Your Own Review

  • Price
    Value
    Quality

* Required Fields