LED Pool-Wall Light
LED Pool-Wall Light

More Views

LED Pool-Wall Light

SKU# 56687E

This innovative LED pool light delivers more light than a 50-watt halogen pool light – and it never makes direct contact with the power source. The light clings to the sidewall magnetically and power transfers safely through the pool wall to provide extra bright, long-lasting illumination to light up the party!

Out Of Stock
 
Feature
  • 110-120 Volt
  • Low-level power is transferred through the wall from a magnetically attached power base
  • No need to cut a hole in the side of your pool – this light is magnetic!
  • This light can be attached to any sidewall in any location – and be easily moved to different areas of the pool!
  • If the inner light unit becomes separated from the outer power source, it will float to the surface for easy retrieval
  • Low electricity level – safe to use around pool and water
  • Plugs in easily - No batteries to recharge!
  • For use with soft sided PVC pool only
  • U.S. Patent 8,486,252
  • 2-Year Warranty
Specs
Item # 56687
Size N/A
Age Grading adult
Package Dimension 10 in x 7.875 in x 5.875 in
Package Weight 4.43 lbs
Product Size
In The Box
Manuals & Video
Replacement Parts
Faq
» Your pool can be easily emptied and stored in a safe place during the winter. However, many people choose to leave their pool up year round. In areas where freezing temperatures occur, there is risk of ice damage. It is recommended to drain, disassemble and store the pool in a safe place when temperatures drop below 32 degrees Fahrenheit. See "How To Drain Your Pool" section. Clean pool water thoroughly (If Easy Set Pool make sure the top ring is properly inflated). Remove the skimmer (if applicable) or any accessories attached to the threaded strainer connector. Replace strainer grid if necessary. Be sure all accessories parts are clean and completely dry before storage. Plug the Inlet and Outlet fitting from the inside of the pool with the plug provided (sizes 10' and 12'). Close the Inlet and Outlet Plunger Valve (15', 18', and 24'). Remove the ladder (if applicable) and store in a safe place. Be sure the ladder is completely dry before storage. Remove the hoses that connect the pump and filter to the pool. Add appropriate winter chemicals. Consult your local pool dealer as different regions vary greatly. Cover pool with Intex Pool Cover. IMPORTANT: INTEX POOL COVER IS NOT A SAFETY COVER. Clean and drain pump, filter housing and hoses. Remove and discard old filter cartridge (keep a spare cartridge available for next season). Bring pump and filter parts indoors and store in a safe and dry area, preferably heated. STORING POOL FOR WINTER After draining pool, dry pool liner completely (100%). Sprinkle talcum powder on liner to prevent vinyl from sticking together and to absorb any water you may have missed. Roll pool liner to avoid creases and relocate to storage area. Place it in original carton if you saved it. Keep all small parts together with filter pump, manual, and pool, and then place in an area that will remain at room temperature throughout the storage season.
» Yes, in some cases certain types of hardy grass such as Bermuda or St. Augustine can grow through the liner. Before setting up your pool, it is recommended that you clear the area of these types of hardy grasses. INTEX will not be held responsible for grasses that may grow through the ground cloth and / or pool liner, as this is not a manufacturing defect. A ground cloth or tarp may be helpful in preventing this from occurring.
» Water condition varies from country to country, states, region, and within specific zones and areas. In some regions the water could be "hard water", this is because the water contains excessive minerals, such as calcium and magnesium, thus causing the water to adopt a milky color. Check your local pool supply store for advice on water treatment and balance.
» If a product is purchased directly from Intex www.intexcorp.com and it is found to be defective within 90 days of purchase, call Intex Consumer Service and an Intex agent will initiate a claim for the defective product. Once the claim is processed and approved the replacement is shipped within two business days. For a second replacement within the initial 90 day service period, Intex requires that a claim be filed for defective parts and that the defective item be returned at the consumer’s expense. Call (800) 234-6839 for further assistance and information.
» There are no special policies for gifts. Our replacement polices apply the same to purchased items and gifts and a copy of the validated sales receipt is required.
» Most replacement parts for Intex products are available directly from Intex at www.intexstore.com or contact us direct at (800) 234-6839. We accept Visa, Mastercard, American Express and Discover only, no checks, money orders or C.O.D.s.
» Yes.
» A PVC or silicon based glue for repairing camping mats, tents, shoes, inflatable boats, etc are suitable for INTEX pools.
» The LED lights can last for more than 50,000 hours. However, the life of the product is limited by the other factors.
» This is normal, due to a temperature differential some fogging may occur. It does not affect the unit.
» Excessive use of pool chemicals can cause the color of the inside wall printing to fade away faster, like a heavy chlorinated public swimming will cause a bathing suit color to fade.
» The sprayer can be used with all Intex filter pump models (except models M1, M2, 02, 03R, 603, 604, 637 & 638) and with chlorine generator/filter pump (saltwater pool system/filter pump) models 8111/8221/8231. All the Easy Set and Frame pools work with the sprayer as long as the liner has the proper inlet/outlet hose connectors.
» The Intex solar LED landscape light contains recyclable batteries which should be properly disposed of. The rest may be disposed of in a normal fashion. Contact your local authority for instructions on battery disposal in your area.
» No. The INTEX floating pool light is waterproof for depths up to 3 feet (0.91 m) for 24 hours.
» Orders are shipped within 2-3 business days once the order is placed. Orders will be shipped by regular mail or Fed EX (depending on the size of the order). Therefore, transit time will be determined based on your location and shipping method.
» No, the INTEX pool side tray is easy to install, it takes only few minutes to install and no tools are required. (See owner manual)
» INTEX floating pool light will provide light for up to 4 hours after a full charge. Illumination time may vary based on how long the unit was charged and how old the batteries are.
» If your e-mail address was provided at the time the order was placed, and your order was shipped by Fed EX, you will receive an e-mail confirmation with the tracking number. You can then go to the Fed EX website to track the package.
» The Intex LED pool wall light is suitable for above ground pool with a PVC wall thickness of 1mm (0.04in) or less. It is NOT suitable for above ground steel wall pools even if the thickness is 1mm (0.04in) or less.
» No, the Intex Pool Side Tray is designed for the Intex Metal Frame pools only. This includes Circular, Rectangular, Ultra and Rectangular Ultra Metal Frame pools. It cannot be used on Easy Set, Oval, and Sequoia Spirit or non-Intex pools.
» Yes, even in a large pool the light will brighten up the water. If you would like to light the whole pool you may need two or more INTEX pool lights.
» Empty the pool, use a soft brush, mild detergent and water to remove algae stains from the pool liner. Thoroughly rinse and dry before refilling or storage.
» A standard shipping and handling charge is calculated into every order, regardless of the shipping method.
» No, due to various local, state, national and international standards, the skimmer and sprayer cannot be operated while in the pool since the filter pump is not to be operated when the pool is in use and/or occupied.
» 1,000 gal/hr is the minimum flow rate of INTEX filter pumps if the sprayer is to be used effectively.
» Yes, the LED light receiver module will float to the surface for easy retrieval.
» In different regions and depending on the season, the solar panel needs to be adjusted to allow maximum sun light exposure for better performance. See attached table for details.
» Yes. Intex will accept replacement part orders, accessory orders, and warranty questions from Canadian consumers. For replacements on items other than Above Ground Pools and specific airbeds, please refer back to the original place of purchase. To order replacement parts please call 800-234-6839 or go to www.intexcorp.com.
» 30 Days from the date of delivery as stated on the shipping invoice (except items that come with a written warranty).
» U.S. currency.
» The maximum range depends on the flow rate of the filter pump. For 1,000 – 1,500 gal/hr filter pump like Model 12R/22R and Model 635/636, the water can spray up to 9' with proper adjustment of the bypass valve. For 2,000 – 2,500 gal/hr filter pump as Model 51/52 and Model 633/634, the water can spray up to 23' by adjusting the bypass valve. For 3,000-gal/hr filter pump as Model 520R/530R the water can spray up to 24' by adjusting the bypass valve.
» Yes, it is safe for people to swim while the Intex LED Pool Wall Light is on. The module submerged in water has no wiring linked to an electrical outlet and operates under a very low voltage and current.
» No. The Intex LED Pool Wall Light is designed to be submerged in above ground swimming pools only.
» Thoroughly clean and air dry, and store the product indoors at temperatures between 32 degrees Fahrenheit (0 degrees Celsius) and 104 degrees Fahrenheit (40 degrees Celsius). Please refer to the Long Term Storage section in the Owner’s Manual for details.
» See below table:
Product Model High Medium Low
Base 5-in-1 LED light CL1110 40Min 3.5H 25H
Deluxe 5-in-1 LED light CL1111 3H 8H 35H
» The INTEX Pool Side Tray will support a maximum weight of 5 Kg (13.4 lbs) making it perfect for refreshments, sun screen, etc. The hooks below the tray support a maximum load of 2 Kg (5.4lbs) each and offer a great place to hang your towels or extra clothes. NOTE: To prevent damage caused by items accidentally falling into the water, do not place valuables and non-waterproof items on the pool tray.
» Under most circumstances, no. INTEX pool lights are designed to withstand most falls of less than 3 feet (0.91 m). Breakage due to falls is not covered under warranty.
» Your INTEX floating pool light should be cleaned with hot soapy water. Do not use any strong cleaners as this may cause the casing to cloud.
» Thoroughly clean and air dry, and store the product indoors at temperatures between 32 degrees Fahrenheit (0 degrees Celsius) and 104 degrees Fahrenheit (40 degrees Celsius). Please refer to the Long Term Storage section in the Owner’s Manual for details.
» Processing time is approximately 3 business days from the date we receive the product. It is then shipped by Fed EX Ground from Long Beach CA. Therefore, transit time will be determined by your location.
» If it is within the warranty period please contact your INTEX Service Station listed in the owner’s manual (see Limited warranty in owner’s manual).
» It has a limited warranty of two (2) years from the date of the initial retail purchase before 2012 year. After that, It has a limited warranty of one (1) year from the date of the initial retail purchase. Keep your original sales receipt with Owner’s Manual, because proof of purchase will be required and must be accompanied with warranty claim.
» Yes, you can manually turn off the light when it is dark. The switch is located under the solar light portion; unscrew the solar light portion from the lower tube to access the switch. See owner’s manual for details. Note: remember to turn the switch back on again for normal operation.
» The Intex solar LED landscape light should be setup on a level surface, in a bright sunny area free of obstructions. Do not setup in shaded areas, under trees or areas with low sunlight exposure.
» The Intex 5-in-1 LED Light deluxe model CL1111 is powered by an internal built-in rechargeable battery, however it can be operated from the external battery pack using 4 x AA size batteries (not included) when the internal built-in battery is exhausted.
» Yes by pressing the ON/OFF button:
Press Button Brightness Percent
Once Low 8%
Twice Medium 50%
Three times High 100%
Four times Off
» Charging with a computer through the USB cable will take about 7 to 8 hours to fully charge the battery. Charging through a vehicle’s 12V DC receptacle with the detachable 12V DC power cord will take about 2 to 3 hours to fully charge the battery.
» It takes approximately 10 hours for a full charge. We strongly recommend you to leave the INTEX floating pool light on its charger between uses, this will not damage your light and it will be ready for use anytime you need it.
» No, the INTEX floating pool light is designed for the residential pool use only.
» The INTEX floating pool light is designed for approximately 500 recharges. Please follow the recharging procedure on the Owner's Manual.
» It will not harm to your INTEX floating pool light. Fully recharge the unit and use it according to the Owner's Manual.
» It has a limited warranty of two (2) years from the date of the initial retail purchase before 2012 year. After that, It has a limited warranty of one (1) year from the date of the initial retail purchase. Keep your original sales receipt with Owner’s Manual, because proof of purchase will be required and must be accompanied with warranty claim.
» The product should be fully charged before storage. It should be recharged every two months, if it is not continuously plugged in. Otherwise, it will gradually damage the battery capacitance.
» No, payment can only be made using Visa, Master Card, Discover or American Express.
» No. The shipping costs have already been incurred at your request and therefore are non-refundable.
» No, you must provide a physical address for Fed EX to deliver your package. Fed EX does not deliver to Post Office boxes, APO or PPO addresses.
» The transmitter module is waterproof against splash and rain, however it is not designed to be submerged in water. Do not submerge the transmitter module as this will void the warranty.
» The LED lights can last for more than 20,000 hours. However, the life of the product may be limited by other factors.
» It has a limited warranty of one (1) year from the date of the initial retail purchase. Keep your original sales receipt with Owner’s Manual, because proof of purchase will be required and must be accompanied with warranty claim.
» Your LED pool wall light should be cleaned with fresh water and mild soap. Do not use any strong cleaners or hard brushes as these may cause the casing to cloud.
» It takes approximately 8 hours for a full charge.
» Under most circumstances, no. Intex solar LED landscape light is designed to withstand most falls of less than 0.91 m (3 feet). Breakage due to falls is not covered under warranty.
» This is normal, due to a temperature differential some fogging or condensation may occur. It does not affect the unit.
» Yes. The Intex solar LED landscape light is an environmentally friendly product that relies on solar energy to charge its battery. It does not require household electricity.
» During the winter season and cloudy days, sun light might not be sufficient to fully charge the battery, and may not be able to provide maximum hours of illumination when it gets dark. Also ensure the solar panel is orientated in the right direction for maximum sun exposure, northern hemisphere users should position the product with the solar panel facing south. Southern hemisphere users should position the product with the solar panel facing north.
» Best time to perform this is either in the morning (a few hours prior noon) or in the afternoon (a few hours past noon), when it is clear if the sun is rising or setting on its appointed route. Position yourself with your right shoulder toward the sun. If it is before noon, the sun is rising and is therefore still to the east, meaning that you are facing north and your back is facing south. If it is past noon, the sun is setting in the west, meaning that with your right shoulder positioned toward the sun you are facing south and your back is facing north.
» Turn the back knob clockwise to convert the light into a 360 degree lantern, and turn counterclockwise to convert the light to a flashlight/torch.
» The built-in battery indicator light will turn red when is in charging mode, and green when it’s fully charged.
» 1. Pull out the left rubber protector to access the battery compartment cover and then press and open the cover. 2. Insert four AA size batteries following the orientation shown on the battery compartment. 3. Close the cover and replace the rubber protector back. 4. With the switch off, plug in the external battery pack cord into the device input receptacle and the device will start charging. 5. To use the device while charging the built-in battery, simply turn on the switch, the LED will light up and the built-in battery is charging at the same time. It takes about 7 to 8 hours to fully charge the battery.
» The INTEX floating pool light is designed for the use for all INTEX pools, in clear water it will light round INTEX pool up to 18' in diameter.
» If it is within the warranty period please contact your INTEX Service Center (see INTEX Service Center Locations section in the Owner’s Manual) (see Limited warranty in owner’s manual).
» The INTEX floating pool light contains recyclable batteries which should be properly disposed of. The rest may be disposed of in a normal fashion. Contact your local government for instructions on battery disposal in your area.
» This is a built-in safety feature which prevents overheating. It does not harm the device.
» It takes 2-3 business days to process the order and 2 additional business days in transit for Fed EX to ship. This is the fastest method of shipping that we offer. There is no next-day air service available. The package will be received within approximately 3-5 business days. All shipments to Canada will go by standard (ground) Fed EX or regular mail.
» No. We do not recommend the sprayer on filter pumps other than INTEX models. The joints may not fit correctly and the pressure may be too high, causing damage to the product and / or personal injury.
» If the wall thickness is more than 1mm (0.04in), the self protection mechanism will be triggered and the LED light will not light up. To reset it, ensure the wall thickness is less than 1mm (0.04in), disconnect the device from the main outlet and re-plug the device after 5 to 10 seconds.
» 5 watts.
» No. The Intex LED pool wall light does not require any special tools, drilling or cutting the pool wall. The LED pool wall light uses magnetic wave technology to generate energy and to stay in place. The location of the LED pool wall light can be changed swiftly and easily without tools or damaging the pool wall.
» In clear water it will light up a round INTEX pool up to 5.5m (18’) in diameter, and is suitable for use in all Intex pools.
» Yes, even in a large pool the light will brighten up the water. If you would like to light the whole pool you may need two or more INTEX pool lights.
» No.
» No, the Intex LED pool wall light is designed for use with residential above ground pools with PVC walls only.
» The Intex LED pool wall light has a protection feature in case the wall thickness exceeds 1mm (0.04in). Bringing the two modules together very slowly simulate a wall thickness that is greater than 1mm (0.04in) thus triggering the protection mechanism, hence no current to the LED light. To reset the protection mechanism, disconnect the device from the main outlet and re-plug after 5 to 10 seconds.
» It will provide an average of 3 to 5 hours of illumination after a full charge. Illumination time may vary based on how long the unit was charged and how old the batteries are.
» The Intex solar LED landscape light provides a downward reflection illumination of up to 1.8m (5.9ft) in diameter.
» The Intex solar LED landscape light is designed for approximately 1000 recharges.
» Northern hemisphere users should position the product with the solar panel facing south. Southern hemisphere users should position the product with the solar panel facing north.
» Intex distributes two kinds of 5-in-1 LED Lights, the base model CL1110 and the deluxe model CL1111.
» The Intex 5-in-1 LED Light base model CL1110 uses 3 x AAA cell size batteries to operate. The AAA batteries can be disposable alkaline or rechargeable types.
» The 3 functions are: flashing hazard light, lantern/flash mode/OFF and emergency beacon/international SOS signal light.
» Press the ON/OFF button four times to switch off the device.
» It is the consumer’s responsibility to notify Intex within 15 days of receiving a defective or incorrect replacement by calling (800) 234-6839.
» No. Our system does not accept COD (Cash on delivery) or check. We only accept Visa, Mastercard, American Express and Discover credit cards. Pre-paid credit cards can be used if they are from one of these four companies.(for U.S & Canada only)
» No.
Related Products